Fiber To The Antenna Cable Assemblies and Connector Types
Hybrid Jumper (Remote Radio Head)
Hybrid Jumper for Remote Radio Head (RRH)
The hybrid jumper cable assembly combines optical fiber bundles and power conductors in one cable jacket. The optical fiber can have outdoor connectors factory installed. Trunk cable versions are also available.
Features:
- 1 to 3 fiber pairs, LC connector or vendor specified connector
- 1 pair of power conductors AWG 6,8,10, or 12, RRH vendor specified connector
- Insulation of Power Cable THHN/THWN
- Corrugated copper or aluminium
- Outer Sheath of UV resistant
- Temperature Range -40℃to +80℃
Applications :
- Multi-purpose Outdoor
- For connection between distribution box and RRH
- Deployment in Remote Radio Head cell tower applications
Features:
- 1 to 3 fiber pairs, LC connector or vendor specified connector
- 1 pair of power conductors AWG 6,8,10, or 12, RRH vendor specified connector
- Insulation of Power Cable THHN/THWN
- Corrugated copper or aluminium
- Outer Sheath of UV resistant
- Temperature Range -40℃to +80℃
Applications :
- Multi-purpose Outdoor
- For connection between distribution box and RRH
- Deployment in Remote Radio Head cell tower applications
Fiber Optic Jumper (Remote Radio Head)
Fiber Optic Jumper for Remote Radio Head (RRH)
The fiber only jumper cable assembly is used to carry the data when it is run separately from the power jumper. The fiber only jumper can have outdoor connectors factory installed.
Features :
- Capacity 1 to 3 Fiber pairs, LC connector or vendor specified connector
- Corrugated Steel armor or Non armor
- Outer Sheath of UV resistant
- Temperature Range -40℃to +80℃
Applications :
- Multi-purpose Outdoor
- For connection between distribution box and RRH
- Deployment in Remote Radio Head cell tower applications
Features :
- Capacity 1 to 3 Fiber pairs, LC connector or vendor specified connector
- Corrugated Steel armor or Non armor
- Outer Sheath of UV resistant
- Temperature Range -40℃to +80℃
Applications :
- Multi-purpose Outdoor
- For connection between distribution box and RRH
- Deployment in Remote Radio Head cell tower applications
Power Jumper (Remote Radio Head)
Power Jumper for Remoter Radio Head (RRH)
The power jumper cable assembly is used to separately provide power to the Remote Radio Head and runs parallel to the fiber optic jumper cable assembly.
Outdoor ONC/ODC Connector
Commonly used on Samsung, Ericsson and Alcatel-Lucent RRHs. This weatherproof connector attaches to socket on panel of RRH or extension jumper.
Outdoor ONC/ODC Socket for Extension
|
Outdoor ONC/ODC Connector Plug
|
IP67 Industrial Duplex LC Connector
This outdoor waterproof connector attaches to adapter on panel of RRH. The common LC connector pair inside allows easier testing and cleaning. There are two types of connector plugs available: threaded and easy-connect bayonet.
IP67 Industrial Duplex LC Receptacle
|
IP67 Industrial Duplex LC Connector Plug
|
FullAXS Connector
Commonly used in some Ericsson Remote Radio Heads, the shell encloses duplex LC connectors. Plugs directly into SFP at panel of RRH.
FullAXS Socket
|
FullAXS Connector Plug
|
Ericsson Crimp
Ericsson Cable Crimp
|
The crimp around the cable jacket provides a holding mechanism within the pre-chamber of the Ericsson Remote Radio Head.
|
Nokia Siemens Networks Boot
The distinctive Nokia Siemens Networks boot for straight or 90 degree connections on the RRH panel are available.
NSN Boot with 90 degree Duplex LC Clip
|
NSN Boot with Straight Duplex LC Clip
|